- AnnieTopics: 1 Replies: 5@annie
I’d like to contact someone about commercial fans that are safe and effective. Someone who is experienced and who can advise me on what to pick with safety and efficiency in mind. I don’t know too much about these fans.
- OmarTopics: 1 Replies: 5@omar
- CarterTopics: 1 Replies: 13@carter
Sometimes, little things can make a big difference. If you don’t know what you are doing, then it could cause more harm than good. Installation is another thing that can cause a headache if you go with an inexperienced company. The right fan and proper installation are paramount.
- GemmaTopics: 1 Replies: 8@gemma
I am no expert, but I believe there are a couple of main fans called axial and centrifugal. You may have seen axial fans. They look like propellers. The air is drawn straight through axial fans. They are capable of drawing a huge amount of air. Many ducts use this kind of fan.
Axial fans do not perform as well when there is some kind of resistance. Centrifugal ones on the other hand can function well even with resistance. These types (centrifugal) use a variety of blades and blade shapes. They are used in a lot of exhaust ventilation systems.
- WinnieTopics: 1 Replies: 7@winnie
To be honest, I do not think too many of us know too much about these types of commercial fans. For that reason, this is not something you should do on your own. This is best left to the top professionals. Any mistakes could prove to be costly. Not only that, it might not follow the proper regulations.
I know a little, but like I said, contact someone. For example, if the exhaust air contains smoke and dust, then a backward inclined fan should be selected. This can be either centrifugal or axial.
It all depends on the nature of the business and what you need it to do. So, if there is some dust, fume or moisture, you can choose a radial centrifugal fan.
- KatyTopics: 0 Replies: 9@katy
You need to be careful when choosing. Sometimes, exhaust air may contain flammable material or even explosive material. You have to have the right system in place.
Remember also that there will be national as well as provincial regulations that must be followed. So, in case of such dangerous exhaust materials, it has to be made spark-resistant.
Now, if something happens to be corrosive, then there must be some kind of special coating to counter this. I would suggest inviting someone over and explain everything to them. Or, you can meet with the professional and tell them the nature of your business.
- TobiasTopics: 0 Replies: 4@tobias
You want to choose something where the performance of the fan is optimal and reliable. There are a few things that may hinder the fan’s performance.
For example, the tension of the belt or the fan shaft bearings. This tends to be a major problem. The housing and blades may be affected by the accumulation of materials.
Make sure that whatever you get, it must have regular maintenance. This allows it to perform consistently well.
You must be logged in to reply to this topic.